Config Menu; Table 2-3: Config Menu Table - Tektronix WCA330 User Manual

Menu Functions

CONFIG Menu

Table 2-3: CONFIG menu table

Top level Subordinate level, options and descriptions
Factory Reset Reset the current settings to the factory default.
To display this menu, press CONFIG:MODE (front panel) Õ [Config] <- (top side key).
NOTE. The settings on the Remote (Util 8) will not be changed.
Power On... Loads and saves the power on settings. The power on settings are saved in the system file init.cfg.
To display this menu, press CONFIG:MODE (front panel) Õ [Config] <- (top side key).
Load From
INIT.CFG
Save To
INIT.CFG
Return To
Default
Mode... The CONFIG:MODE menu allows you to set up signal process and display systems using basic patterns.
The analyzer has predefined basic setting patterns used frequently. Their icons are displayed in the side keys.
NOTE. The frequency and the span for the basic setting pattern default to 1.5 GHz and 3 GHz respectively.
After making a basic setting, set the span to a proper value.
For the default values of the basic setting patterns, refer to Appendix C.
Load (*.CFG)
Save (*.CFG)
Spectrum
Spectrum
Spectrogram
Dual
Zoom
2-48
The CONFIG menu configures the analyzer with the predefined basic patterns.
You can select the CONFIG menu in the CONFIG area on the front panel.
Reset the analyzer to the power on settings.
NOTE: The settings on the Remote (Util 8) will not be changed.
Saves the current settings to the system file init.cfg.
Return the power on settings to the factory default.
Loads the instrument settings from a file and configures the analyzer.
Saves the current settings in a specified file. If you save the setting patterns frequently used in a
file, you can load them to set up the analyzer when necessary.
Configures the analyzer for observing spectra.
Configures the analyzer for observing spectra and spectrograms.
Configures the analyzer for the dual (frequency and time) mode.
For the dual mode, refer to Memory Mode on page 3-5.
Configures the analyzer for the zoom mode.
For the zoom mode, refer to Memory Mode on page 3-5.
WCA330 & WCA380 User Manual