System Installation; Ship Kit Contents - Agilent Technologies Intuvo 9000 Installation And First Startup

1
Installing the GC

System installation

Ship kit contents

10
If installing an ALS, the ALS can be used for checkout. Also
refer to the ALS installation documentation.
When installed as part of a complete system including an
Agilent data system, first install the GC up to the checkout step.
Configure the new GC in the data system and open an online
instrument session. Use the data system to perform the
checkout test.
When installed as part of other complete systems, for example
in an Agilent GC/MSD or GC/MS system, see the installation
instructions for that system.
Several ship kits will arrive with the GC. Most parts needed for
installation will be found in the 9000 GC System Ship Kit. Ship
kits for the ordered inlet and detector will include the inlet- and
detector-specific parts needed for checkout and maintenance,
for example, the inlet checkout liner, inlet wrench, septa,
detector checkout sample, and typical cleaning tools (varies by
inlet and detector type).
Syringe and plunger button, for manual injection
1/8-in Nut and ferrule set, brass, 10/pk
Certified vial sample pack
LAN cable
Intuvo Torque Driver handle and extension
Torx keys, T10 and T20
Gas line ID labels
Agilent Intuvo 9000 Gas Chromatograph Safety Information manual
MSD Cover insert assembly
Intuvo inlet chip, G4581-60031
Bus front door assembly, G4581-60207
Compression bolts (2), G4581-60260
Intuvo gaskets, polyimide, 2/pk
Agilent Intuvo 9000 GC Installation