Seneca VPN BOX 2 Installation Manual

Seneca VPN BOX 2 Installation Manual

Advertisement

PRELIMINARY WARNINGS

The word WARNING preceded by the symbol
The word ATTENTION preceded by the symbol
instrument or the connected equipment.
The warranty shall become null and void in the event of improper use or tampering with the module or devices
supplied by the manufacturer as necessary for its correct operation, and if the instructions contained in this
manual are not followed.
WARNING: The full content of this manual must be read before any operation. The module must only be used by
qualified electricians. Specific documentation is available via QR-CODE shown on page 1.
The module must be repaired and damaged parts replaced by the Manufacturer. The product is sensitive to
electrostatic discharges. Take appropriate measures during any operation.
Electrical and electronic waste disposal (applicable in the European Union and other countries with recycling).
The symbol on the product or its packaging shows the product must be surrendered to a collection centre
authorized to recycle electrical and electronic waste.
SENECA s.r.l.; Via Austria, 26 – 35127 – PADOVA – ITALY; Tel. +39.049.8705359 - Fax +39.049.8706287
CONTACT INFORMATION
Technical support
This document is the property of SENECA srl. Copies and reproduction are prohibited unless authorised.
The content of this document corresponds to the described products and technologies.
Stated data may be modified or supplemented for technical and/or sales purposes.
MI00600-0-EN
INSTALLATION MANUAL
VPN BOX 2
indicates conditions or actions that put the user's safety at risk.

DOCUMENTATION

support@seneca.it
INSTALLATION MANUAL
indicates conditions or actions that might damage the
Product information
sales@seneca.it
1/2

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the VPN BOX 2 and is the answer not in the manual?

Questions and answers

Summary of Contents for Seneca VPN BOX 2

  • Page 1 The symbol on the product or its packaging shows the product must be surrendered to a collection centre authorized to recycle electrical and electronic waste. DOCUMENTATION SENECA s.r.l.; Via Austria, 26 – 35127 – PADOVA – ITALY; Tel. +39.049.8705359 - Fax +39.049.8706287 CONTACT INFORMATION Technical support support@seneca.it...
  • Page 2 I/O INTERFACE ON/OFF button, 1x PWR LED, 1x HD ACT. LED Programming tools, app, manuals, templates, examples, etc. for the product can be downloaded free of charged at www.seneca.it in the product section. ELECTRICAL CONNECTIONS REMOTE BUTTON By means of the removable two-pole terminal, located on the back of the device, it is possible to install an external push-button for switching the device on and off, which can be controlled remotely.

Table of Contents