Advertisement
Quick Links
Thank you for
choosing HERD!
For assistance call
1-888-543-4373
www.HERD.com
Important
• Herd Bumpers are vehicle "Make & Model" specific. Use of a bumper on a vehicle other than the model it
was designed for will constitute improper use of the product and may void warranty.
• Unless otherwise specified, Grade 8 or Class 10.9 hardware is to be used. For the purposes of these
instructions, OEM hardware means the truck's original factory hardware.
• For further detail of warranty coverage and warranty repair information visit
General Safety
• Take time to fully read the instructions before installing the Herd bumper.
• At all times exercise safe work shop practices, wear steel toe boots and safety glasses during installation.
• Parts and components of the Herd bumper can be heavy, handle with care to avoid injuries.
• Respect power tools and use them as advertised.
Part No: MK15C4-02-IG
Rev: C
Date: 04-Mar-19
Installation Guide
SKU #
MK15C4-02
1
Truck Model
Mack Anthem
.
www.HERD.com
HERD North America Inc.
2168 Springfield Road
Box 28, Group 525, RR5
Winnipeg, MB. Canada R2C 2Z2
1-888-543-4373
www.HERD.com
1-888-543-4373
Advertisement
Related Manuals for Herd MK15C4-02
Summary of Contents for Herd MK15C4-02
- Page 1 Important • Herd Bumpers are vehicle "Make & Model" specific. Use of a bumper on a vehicle other than the model it was designed for will constitute improper use of the product and may void warranty. • Unless otherwise specified, Grade 8 or Class 10.9 hardware is to be used. For the purposes of these instructions, OEM hardware means the truck's original factory hardware.
- Page 2 500179 NUT-NYLOCK 1-8 NC GR8 YZP 500210 WASHER-FLAT 1 SAE GR8 YZP 500310 BOLT-HEX 7/16-14X1-3/4 NC GR8 YZP 500312 NUT-NYLOCK 7/16-14 NC GR8 YZP 500311 WASHER-FLAT 7/16 SAE GR8 YZP 1-888-543-4373 Part No: MK15C4-02-IG Rev: C www.HERD.com Date: 04-Mar-19 1-888-543-4373...
- Page 3 (see Figure 1.2) Figure 1.1 – Remove Factory Bumper (Passenger Side Shown) Remove 2 bolts on top Figure 1.2 – Remove center bolts on plastic bumper Part No: MK15C4-02-IG 1-888-543-4373 Rev: C www.HERD.com Date: 2020-12-10...
- Page 4 Installation Procedure 2. Remove factory two hooks as shown in Figure 2. Remove Hair Pin Tow Mount Figure 2 – Factory Tow Hook Uninstall (Passenger Side Shown) Part No: MK15C4-02-IG 1-888-543-4373 Rev: C www.HERD.com Date: 2020-12-10 1-888-543-4373...
- Page 5 CAS radar from the Figure 4 – Mesh plate Removal (Passenger Side Shown) crossmember. (The radar is mounted in front of mesh plate – not shown here) Part No: MK15C4-02-IG 1-888-543-4373 Rev: C www.HERD.com Date: 2020-12-10 1-888-543-4373...
- Page 6 Figure 5.2 There is a gap between OEM bracket and tow mount for the supplied mounting brackets (items 8 and 9) to slide in. Figure 5.2 – Herd Mounting Brackets Location (Driver Side Shown) Part No: MK15C4-02-IG 1-888-543-4373 Rev: C www.HERD.com...
- Page 7 6. Open bumper by pulling on the handle. Using a crane, lift the bumper (Item 1) and universal bracket (Item 2) and attach to Herd submounts (items 8, 9 and 10). Note: If installer does not have a crane available, bumper can be...
- Page 8 Open the bumper and tighten the bolts until they are snug. c) Close the bumper again to Figure 9.1 – Bracket and Hinge Reassembly ensure the latches engage properly. Part No: MK15C4-02-IG 1-888-543-4373 Rev: C www.HERD.com Date: 2020-12-10 1-888-543-4373...
- Page 9 Mount OEM driving lights into the mounting bracket for both passenger and driver sides using the provided hardware. Reinstall driving light brackets into HERD bumper using the provided hardware. Figure 10 – OEM Light Installation (Passenger Side Shown) Part No: MK15C4-02-IG 1-888-543-4373 Rev: C www.HERD.com...
- Page 10 Figure12 – Installation of Air Deflector 13. If the truck was equipped with a radar sensor, please refer to the HERD S009 Installation Guide. Figure 13 – HERD Radar Sensor Bracket Part No: MK15C4-02-IG 1-888-543-4373 Rev: C www.HERD.com Date: 2020-12-10...
- Page 11 Check mounting points after the first 5000 km and every 3-6 months. • This bumper is equipped with Herd Slam Latch which requires periodic adjustment. Refer to Slam Latch Installation adjustment instructions (S001) to properly adjust your Slam Latch. Part No: MK15C4-02-IG...
Need help?
Do you have a question about the MK15C4-02 and is the answer not in the manual?
Questions and answers