Advertisement
Quick Links
This Guide is for all Truck Guard
Models, including (where
applicable):
Aero
Defender
Texas
Big Texas
Road Train
Super Road Train
Thank you for choosing HERD!
For assistance call
1-888-543-4373
www.HERD.com
Important
• Herd Truck Guards are vehicle "Make & Model" specific. Use of a Truck Guard on a vehicle other than the
model it was designed for will constitute improper use of the product and may void warranty.
• Unless otherwise specified, Grade 8 or Class 10.9 hardware is to be used. For the purposes of these
instructions, OEM hardware means the truck's original factory hardware.
• For further detail of warranty coverage and warranty repair information visit
General Safety
• Take time to fully read the instructions before installing the Herd Truck Guard.
• At all times exercise safe work shop practices, wear steel toe boots and safety glasses during installation.
• Parts and components of the Herd Truck Guard can be heavy, handle with care to avoid injuries.
• Respect power tools and use them as advertised.
Part No: KW03-IG
Part No: WS11-LEGACY-IG
Rev: A
Rev: A
Date: 19-Mar-19
Date: 2019-09-24
Installation Guide
Truck I.D.
WS11
1
Truck Models
WS 4900 SFA Drop
Cradle Frame -
Factory Tow Pin -
Non-Lowmax
.
www.HERD.com
HERD North America Inc.
2168 Springfield Road
Box 28, Group 525, RR5
Sunnyside, MB Canada R5R 0J3
1-888-543-4373
www.HERD.com
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Herd Aero
Summary of Contents for Herd Aero
- Page 1 Important • Herd Truck Guards are vehicle "Make & Model" specific. Use of a Truck Guard on a vehicle other than the model it was designed for will constitute improper use of the product and may void warranty. • Unless otherwise specified, Grade 8 or Class 10.9 hardware is to be used. For the purposes of these instructions, OEM hardware means the truck's original factory hardware.
- Page 2 Table 1: Parts and Hardware Included Item No Part No Description BR-WS11-AT ( Only with Aero, Road Train, Super Road BRACKET, Western Star 4900 SFA Drop Cradle Train, Texas, & Big Texas Versions Frame - Factory Tow Pin - Non-Lowmax BR- WS11-FLT (...
- Page 3 Frame - Factory Tow Pin - Non-Lowmax BR- WS11-FLT-SL ( Only with Defender Version 1MPA027 ( Only with Aero, Road Train, Super Road Train, Texas, & Big Texas Versions ASSY - LEGACY LIFT ASSIST 1MPA024 ( Only with Defender Version...
-
Page 4: Installation Procedure
Mounting Brackets Replace the existing factory Figure 4 – OEM Bumper Mounting Brackets & Cast Center Section supplied bumper mounting brackets with the HERD supplied mounting brackets. Reuse OEM Hardware for mounting HERD supplied brackets. Part No: WS11-LEGACY-IG 1-888-543-4373 Rev: A www.HERD.com... - Page 5 1-MP-WS12-SUB.2 (Part of Item 1) on the driver side of the truck frame as shown in figure 6. Do so with HERD supplied hardware (Items 6, 8, 9). Figure 6 – Bracket Submount Installation (Passenger Side Shown) Part No: WS11-LEGACY-IG...
- Page 6 10, 11, 12 equipped with lift assist, the 10, 11, 12 springs must be removed. Refer Figure 8 – HERD Loose Bracket Installation (Passenger Side Shown) to instructions S004 (Defender Truck Guards) or S005 (Aero/Texas Truck Guards) for proper lift assist disassembly procedure.
- Page 7 Check mounting points after the first 5000 km and every 3-6 months. • If this Truck Guard is equipped with Legacy Herd Slam Latch, periodic adjustment is required. Refer to Legacy Slam Latch Installation adjustment instructions to properly adjust your Slam Latch.
Need help?
Do you have a question about the Aero and is the answer not in the manual?
Questions and answers