Herd AeroPLUS C4-02 Adjustment Manual

Herd AeroPLUS C4-02 Adjustment Manual

Slam latch

Advertisement

For assistance call
1-888-543-4373
www.HERD.com
HERD North America Inc.
2168 Springfield Road
Box 28, Group 525, RR5
Winnipeg, MB. Canada R2C 2Z2
Important
The Herd Slam Latch requires adjustment. Proceed with the following steps for instructions on how to
properly adjust your Slam Latch.
1. For the adjustment, access
the mechanism through the
front airflow cut-out of the
Herd Bumper while in the
closed state.
The adjustment is a
reiterative process where
the hinge is tightened in
small intervals until it
reaches the desired firmness
without over-adjusting.
Read entire guide before
continuing.
Part No: S012
Rev: B
Date: 2020-03-12
ECN: 20-013
C4-02 Slam Latch Adjustment Guide
Part #
100027
Slam Latch Kit
Figure 1 – Front view of Adjustment mechanism (drivers side shown)
All C4-02 AeroPLUS
1
Product
1-888-543-4373
www.HERD.com
1-888-543-4373

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AeroPLUS C4-02 and is the answer not in the manual?

Questions and answers

Summary of Contents for Herd AeroPLUS C4-02

  • Page 1 Box 28, Group 525, RR5 Winnipeg, MB. Canada R2C 2Z2 Important • The Herd Slam Latch requires adjustment. Proceed with the following steps for instructions on how to properly adjust your Slam Latch. 1. For the adjustment, access the mechanism through the...
  • Page 2 Bolt B should be loosened only about a 1/8 turn so that it is still snug yet under- tensioned. Figure 3 – Slam Latch adjustment; loosening of fastening bolts (driver side shown). Part No: S012 1-888-543-4373 Rev: B www.HERD.com Date: 2020-03-12 ECN: 20-013 1-888-543-4373...
  • Page 3 If the latch does not close, proceed to step 6. If the Bumper Closes with desired firmness, proceed to step 7. Figure 5 – Slam Latch perfectly adjusted position (passenger side shown). Part No: S012 1-888-543-4373 Rev: B www.HERD.com Date: 2020-03-12 ECN: 20-013 1-888-543-4373...
  • Page 4 7. Tighten Bolt A and Bolt B to 110 ft lbs, locking the ramp into the adjusted position. The adjustment is now complete. Figure 7 – Tightening of Slam Latch adjustment bolts (passenger side shown). Part No: S012 1-888-543-4373 Rev: B www.HERD.com Date: 2020-03-12 ECN: 20-013 1-888-543-4373...

This manual is also suitable for:

100027

Table of Contents