Advertisement
WS30C4-02 – Installation Procedure
This document shows how to install your new Truck Guard onto your truck.
Ensure that you have completely read and understand document S017 - Safety before beginning this installation
procedure.
I. Removing the OEM Front Bumper
Figure 1: Removing the OEM Front Bumper (Your Truck may not be exactly as shown)
1. This Truck Guard is NOT COMPATIBLE with OEM Fog Lights.
Unplug the OEM Fog Light's Wiring Harness (if applicable).
2. Remove the OEM Front Bumper by removing the circled bolts shown in Figure 1a.
Retain OEM hardware for later use.
Part No: WS30C4-02 - INSTALLATION PROCEDURE
Rev: A
Date: 2023-01-20
Page 1 of 3
1-888-543-4373
www.HERD.com
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Herd WS30C4-02
Summary of Contents for Herd WS30C4-02
- Page 1 Unplug the OEM Fog Light’s Wiring Harness (if applicable). 2. Remove the OEM Front Bumper by removing the circled bolts shown in Figure 1a. Retain OEM hardware for later use. Part No: WS30C4-02 - INSTALLATION PROCEDURE 1-888-543-4373 Page 1 of 3 Rev: A www.HERD.com...
- Page 2 WS30C4-02 – Installation Procedure II. Installing the HERD Submounts and Truck Guard on truck. Figure 2: HERD Submounts and Truck Guard Installation on a Truck Part No: WS30C4-02 - INSTALLATION PROCEDURE 1-888-543-4373 Page 2 of 3 Rev: A www.HERD.com Date: 2023-01-20...
- Page 3 2. Remove the bottom J-clips and leave the top J-clip on the truck’s OEM Tow Receiver; see Figure 2b. 3. Insert HERD Tow Receiver Mount into the OEM Tow Receiver of the truck frame and rotate 90° to lock in place as shown in Figure 2c.
Need help?
Do you have a question about the WS30C4-02 and is the answer not in the manual?
Questions and answers