Advertisement
Table of Contents
- 1 Reference this Parts List if Your Truck Guard Has a CEB (Captive Eye Bolt) Latching System
- 2 Reference this Parts List if Your Truck Guard Has a Slam Latch Latching System
- 3 Installation Procedure
- 4 Installation Procedure
- 5 Installation Procedure
- 6 Installation Procedure
- 7 Installation Procedure - Important
- Download this manual
This Guide is for all Truck Guard
Models, including (where
applicable):
Aero
Defender
Texas
Big Texas
Road Train
Super Road Train
Thank you for choosing HERD!
For assistance call
1-888-543-4373
www.HERD.com
Important
• Herd Truck Guards are vehicle "Make & Model" specific. Use of a Truck Guard on a vehicle other than the
model it was designed for will constitute improper use of the product and may void warranty.
• Unless otherwise specified, Grade 8 or Class 10.9 hardware is to be used. For the purposes of these
instructions, OE hardware means the truck's original factory hardware.
• For further detail of warranty coverage and warranty repair information visit
General Safety
• Take time to fully read the instructions before installing the Herd Truck Guard.
• At all times exercise safe work shop practices, wear steel toe boots and safety glasses during installation.
• Parts and components of the Herd Truck Guard can be heavy, handle with care to avoid injuries.
• Respect power tools and use them as advertised.
Part No: PB11-LEGACY-IG
Rev: A
Date: 2019-06-06
Installation Guide
Truck I.D.
PB11
1
Truck Models
Peterbilt 365 / 367 /
567 - Slopped Hood -
SBA
.
www.HERD.com
HERD North America Inc.
2168 Springfield Road
Box 28, Group 525, RR5
Sunnyside, MB Canada R5R 0J3
1-888-543-4373
www.HERD.com
1-888-543-4373
Advertisement
Table of Contents
Related Manuals for Herd Aero
Summary of Contents for Herd Aero
- Page 1 Important • Herd Truck Guards are vehicle "Make & Model" specific. Use of a Truck Guard on a vehicle other than the model it was designed for will constitute improper use of the product and may void warranty. • Unless otherwise specified, Grade 8 or Class 10.9 hardware is to be used. For the purposes of these instructions, OE hardware means the truck's original factory hardware.
- Page 2 Table 1: Parts and Hardware Included Item No Part No Description BR-PB11-AT ( Only with Aero, Road Train, Super Road BRACKET, PETERBILT, 365 / 367 / 567 - Slopped Train, Texas, & Big Texas Versions Hood - SBA BR-PB11-FLT (...
- Page 3 Train, Texas, & Big Texas Versions Hood - SBA BR-PB11-FLT-SL ( Only with Defender Version 1MPA027 ( Only with Aero, Road Train, Super Road Train, Texas, & Big Texas Versions ASSY - LEGACY LIFT ASSIST 1MPA024 ( Only with Defender Version...
- Page 4 Figure 3 – OEM Bumper Removal Front View. Remove & Retain 4 Bolts Per Side Figure 4 – OEM Bumper Removal Back View (Passenger Side Shown) Part No: PB11-LEGACY-IG 1-888-543-4373 Rev: A www.HERD.com Date: 2019-06-06 1-888-543-4373...
- Page 5 Do this for both passenger and driver sides. Install Herd steel bracket to truck using the supplied 3/4" Figure 5 – Tow Receiver Insert nuts (Item 7) and 3/4" washers (Item 8). Tighten fasteners to 70-80 ft-lbs.
- Page 6 Refer to instructions S004 (Defender bumpers) or S005 (Aero/Texas bumpers) for proper lift assist disassembly procedure. Figure 9 – Bracket Installation Side View (PB 567) Part No: PB11-LEGACY-IG 1-888-543-4373 Rev: A www.HERD.com...
- Page 7 Installation Procedure 5. If the Herd Truck Guard was disassembled from bracket in step 3 or 4, reinstall Herd Truck Guard onto bracket using the hardware kept from step 3 or 4. For DFLT & Defender models only: To install the hinge bolts,...
- Page 8 Refer to Legacy Slam Latch Installation adjustment instructions to properly adjust your Slam Latch. • The drop-forged eyebolts are an integral part of the strength of Herd Truck Guards. When tightened firmly, they will minimize vibration and provide superior impact resistance.
Need help?
Do you have a question about the Aero and is the answer not in the manual?
Questions and answers