Advertisement
Quick Links
This Guide is for all Truck Guard
Models, including (where
applicable):
Aero
Defender
Texas
Big Texas
Road Train
Super Road Train
Thank you for choosing HERD!
For assistance call
1-888-543-4373
www.HERD.com
Important
• Herd Truck Guards are vehicle "Make & Model" specific. Use of a Truck Guard on a vehicle other than the
model it was designed for will constitute improper use of the product and may void warranty.
• Unless otherwise specified, Grade 8 or Class 10.9 hardware is to be used. For the purposes of these
instructions, OEM hardware means the truck's original factory hardware.
• For further detail of warranty coverage and warranty repair information visit
General Safety
• Take time to fully read the instructions before installing the Herd Truck Guard.
• At all times exercise safe work shop practices, wear steel toe boots and safety glasses during installation.
• Parts and components of the Herd Truck Guard can be heavy, handle with care to avoid injuries.
• Respect power tools and use them as advertised.
Part No: KW03-IG
Part No: KW01-LEGACY-IG
Rev: A
Rev: B
Date: 19-Mar-19
Date: 2019-06-24
Installation Guide
Truck I.D.
KW01
1
Truck Models
Kenworth W900L -
SFA
.
www.HERD.com
HERD North America Inc.
2168 Springfield Road
Box 28, Group 525, RR5
Sunnyside, MB Canada R5R 0J3
1-888-543-4373
www.HERD.com
1-888-543-4373
Advertisement
Related Manuals for Herd KW01
Summary of Contents for Herd KW01
- Page 1 Important • Herd Truck Guards are vehicle "Make & Model" specific. Use of a Truck Guard on a vehicle other than the model it was designed for will constitute improper use of the product and may void warranty. • Unless otherwise specified, Grade 8 or Class 10.9 hardware is to be used. For the purposes of these instructions, OEM hardware means the truck's original factory hardware.
- Page 2 Only with Defender Version 7-EYEBOLT KIT CAPTIVE EYEBOLT ASSEMBLY HERD TRUCK GUARD TRUCK GUARD APPEARANCE MAY VARY BY SKU 1-MP-KW01.60 MOUNTING ASSEMBLY, TOW EYE, KW01 500088 BOLT-HEX 1/2-13X2-1/2 NC GR8 YZP 500167 NUT-NYLOCK 1/2-13 NC GR8 YZP 500206 WASHER-FLAT 1/2 SAE GR8 YZP...
- Page 3 Only with Defender Version 4-MC-SLA-A ASSY- LEGACY SLAM LATCH HERD TRUCK GUARD TRUCK GUARD APPEARANCE MAY VARY BY SKU 1-MP-KW01.60 MOUNTING ASSEMBLY, TOW EYE, KW01 500088 BOLT-HEX 1/2-13X2-1/2 NC GR8 YZP 500167 NUT-NYLOCK 1/2-13 NC GR8 YZP 500206 WASHER-FLAT 1/2 SAE GR8 YZP...
- Page 4 2. Insert tow receiver inserts (Item 6) into the tow receivers on both passenger and driver sides. Secure in place using OEM clevis pin. Figure 4 – Tow Receiver Insert Installation Part No: KW01-LEGACY-IG 1-888-543-4373 Rev: B www.HERD.com Date: 2019-06-24 1-888-543-4373...
- Page 5 Note: If installer has a crane available, truck guard can be attached onto truck with bracket, otherwise Figure 5 – HERD Bracket Installation (Driver Side Shown) disassemble truck guard from bracket first. Keep hardware. If bumper is equipped with lift assist, the springs must be removed.
- Page 6 4. Tighten 3/4" nut and washer (Items 10, 11) onto threaded end of the tow receiver inserts (Item 6) to 70-80 ft-lbs. Do not overtighten. Figure 6 – HERD Bracket Installation (Driver Side Shown) Part No: KW01-LEGACY-IG 1-888-543-4373 Rev: B www.HERD.com...
- Page 7 Installation Procedure 5. If the Herd Truck Guard was disassembled from bracket in step 3, reinstall Herd Truck Guard onto bracket using the hardware kept from step 3. For DFLT & Defender models only: To install the hinge bolts, the bumper must be in the open...
- Page 8 Check mounting points after the first 5000 km and every 3-6 months. • If this truck guard is equipped with Legacy Herd Slam Latch, periodic adjustment is required. Refer to Legacy Slam Latch Installation adjustment instructions to properly adjust your Slam Latch.
- Page 9 Installation Procedure Part No: KW01-LEGACY-IG 1-888-543-4373 Rev: B www.HERD.com Date: 2019-06-24 1-888-543-4373...
Need help?
Do you have a question about the KW01 and is the answer not in the manual?
Questions and answers