Specifications - Sencore Impulse 300E User Manual

– Specifications

Impulse 300E – Base Unit
Includes –
System –
Display Type:
Keypad:
Configurations Allows:
Rear Panel:
Remote Operation/Update Interface –
Type:
Rear Panels indicators:
Connector:
Front Panel Indicators –
Error LED:
Input LED:
Monitor and Control Interfaces –
Web server GUI:
Front Panel:
Operating Altitudes
AC Power –
Operating Voltage:
Max Power Draw:
Frequency:
Connector:
Line Cord:
Environmental Conditions –
Operating Temperature:
Cooling:
Storage Temperature:
Relative Operating Humidity:
MPEG/IP Transmit
General –
Connector:
Transmit –
Output Format:
Bitrate Range:
Packets/IP Frame:
Number of Outputs:
SRT Transmit
General –
Connector:
Transmit –
Protocol and IP Range:
Page 68 (74)
Impulse 300E – User Manual
Display, keypad, embedded controller, chassis/case,
power supply/line cord
LCD
Snap-dome Membrane
Single Media Gateway
Fixed inputs and outputs
Ethernet, 10/100/1000 Auto Negotiating
Link (Green LED), Activity (Amber LED)
RJ45
Red indicates error is occurring
Off indicates no errors detected
Green indicates valid input is present
Off indicates no valid input
HTTP via web browsing for control & monitoring
Web API full control and monitoring
System monitoring; limited control
0 to 10000 feet
100-240VAC
35W
50/60Hz
IEC 320 C14
Detachable, 3-prong
32 °F to 122 °F (0 °C to 50 °C)
Software regulated fan
-40 °F to 149 °F (-40 °C to 65 °C)
<95% (non-condensing)
2x 10/100/1000 auto negotiate Base-T RJ-45 Ethernet
Ports
UDP and RTP
0.25 – 50 Mb/s
1-7 MPEG Packets/IP Frame
1 – Unicast or Multicast
10/100/1000 auto negotiate Base-T RJ-45 Ethernet
Port
UDP, Unicast