Torque Table; Servicing; Cleaning - Igo ASPIRE CAMILLIEN CE Owner's Manual

54
iGO ASSIST

TORQUE TABLE

The following table provides the recommended torque values for components.
Ensure all fasteners are tightened carefully and checked regularly. Use
of a torque wrench is advised to check values are correct.
Never exceed the recommended torque values.
Some components may have torque values indicated on the part.
Always respect the indicated recommended values.
PART SCREWS / BOLTS
Rear derailleur mount bolt
cable screw
Gear lever mount bolt
Cassette lockring
Crank mount bolt
Pedal pedal axle
Saddle seat post with 1 fitting block
seat post with 2 fitting blocks
Seat post clamp
Stem faceplate
steerer
Grips clamp screw
Rack mount screw to the frame
Fender mount bolt on the fork
mount bolt on the rack/frame
Kickstand bolt
Brake lever handlebar mount screw
Disc brake rotor screw
Brake caliper mount bolt
TORQUE VALUE
8 - 10 Nm
5 - 7 Nm
5 Nm
40 Nm
45 - 50 Nm
25 - 35 Nm
22 Nm
12 Nm
5 - 7 Nm
5 Nm
6 - 8 Nm
2 - 3 Nm
5 Nm
5 Nm
5 Nm
6 - 8 Nm
4 - 5 Nm
4 Nm
5 - 7 Nm

SERVICING

Servicing your bike is very important. You can avoid unnecessary
damage by servicing your bike regularly.
General maintenance
• Check tire pressure regularly
• Check brake wear every month and adjust
• Clean and Lubricate the chain occasionally
• If caught in the rain ensure bike and electrical components are
wiped dry, remove battery and allow to dry over night
• It is recommended to have your bike evaluated every 3
months by a professional bicycle technician
Before every ride
• Make sure battery is charged and locked into position
• Check tire pressure
• Check brakes for proper braking
• Always wear an approved bicycle helmet

CLEANING

Regular cleaning of your electric bike will prolong its life and
reduce the appearance of rust and corrosion build up.
REMOVE THE BATTERY BEFORE CLEANING and use brushes and wet
sponges to remove dirt. Finish by drying with paper cloths / towel.
(Use of a mild soap solution, degreaser, chain lube and a chain
cleaning device are recommended for a thorough cleaning.)
When cleaning the electric bike do not submerge parts or let water accumulate by the
battery or electrics as prolonged exposure to water may damage these components.
Note:
Do not use a hose or pressure washer to directly spray the bike. This may
result in irreparable water damage and will void your warranty.
55