Identify The Battery (Aspire); Remove / Install Battery (Aspire); Identify The Battery (The Royal); Remove / Install Battery (The Royal) - Igo ASPIRE CAMILLIEN CE Owner's Manual

16
iGO DRIVE

IDENTIFY THE BATTERY (ASPIRE)

The battery for the Aspire Camillien CE and Aspire Vendome CE has the following features :
Battery status
Press and hold the power meter button.
Blue ~ 100%
Green ~ 50%
Red Needs Charging
REMOVE / INSTALL BATTERY
To remove the battery from the bike frame, insert key & Turn 90˚
clockwise. The battery will release from the receptacle. Lift the battery
from the top black edge on an angle as shown below.
To re install the battery first insert the lower part of the battery into the receptacle
at the same angle as removal, then push the top of the battery into the receptacle.
You will hear a click of the lock when the battery is secured onto the bike.
Ensure the battery is secure by attempting to gently turn the key in the lock.
When installed correctly there should be no 'give' (the key will not turn).
Always lock battery & remove the key while riding.
INSERT KEY & TURN
CHARGING PORT
POWER METER BUTTON
POWER METER
LIFT BATTERY AT AN ANGLE RE INSTALL BATTERY

IDENTIFY THE BATTERY (THE ROYAL)

The battery for The Royal UF has the following features :
POWER SWITCH
CHARGING PORT
REMOVE / INSTALL BATTERY
To remove the battery from the bike frame, insert key & Turn 90˚ clockwise to the unlock
position. Lift the battery straight up by 2" and remove from the receptacle as shown below.
To re install, line up the battery to the receptacle as shown below and push down
into position. Lock the battery by turning the key 90˚ counter clockwise.
Always lock battery & remove the key while riding.
INSERT KEY & TURN LIFT STRAIGHT UP THEN REMOVE
LOCK
POWER METER
LINE BATTERY TO RECEPTICAL RAIL
17