Software Configuration Setting - Sena ABC User Manual

10 CONFIGURATION SETTING

10.2 Software Configuration Setting

You can change the settings of the headset through the Sena
Motorcycles App or the Sena Device Manager.
Sena Motorcycles Sena Device Manager
10.2.1 Headset Language
You can select the device language. The selected language is
maintained even when the headset is rebooted.
10.2.2 Audio Equalizer (Default: Off)
Increase or decrease the decibel level of different frequency ranges of
audio.
• Balance will adjust all of the frequency ranges to be the same volume
level (0 dB).
• Bass Boost will increase the bass range of audio (20 Hz - 250 Hz).
• Mid Boost will increase the mid range of audio (250 Hz - 4 kHz).
• Treble Boost will increase the high range of audio (4 kHz - 20 kHz).
10.2.3 VOX Phone (Default: Enable)
If this feature is enabled, you can answer incoming calls by voice. When
you hear a ringtone for an incoming call, you can answer the phone
by saying a word such as "Hello" loudly or by blowing air into the
microphone. VOX Phone is temporarily disabled if you are connected
to intercom. If this feature is disabled, you have to tap the Center
Button to answer an incoming call.
10.2.4 VOX Sensitivity (Default: 3)
VOX Sensitivity can be adjusted depending on your riding
environment. Level 5 is the highest sensitivity setting and level 1 is the
lowest.
ABC Motorcycle Mesh Communication System for Ava Arrow Helmets | 31