Sena ABC User Manual page 10

2 INSTALLING THE HEADSET ON YOUR HELMET
3. Peel off the cover of the hook and loop fastener's adhesive tape for
the microphone and attach it to the groove in the inner shell of the
helmet. Then, attach the microphone to the hook and loop fastener.
4. Insert the microphone connector into the groove in the inner shell.
Place the remaining portion of the microphone's cable in the left
speaker pocket for installing the left speaker unit as shown in the
illustration.
5. Peel off the cover of the hook and loop fastener's adhesive tape for
the left speaker and attach it to the groove in the inner shell of the
helmet. Then, attach the left speaker to the hook and loop fastener.
Note: To prevent them from interfering with the installation pads, tuck
the remaining portion of the cable into the grooves and crevices in the
inner shell.
ABC Motorcycle Mesh Communication System for Ava Arrow Helmets | 10