Downloadable Software Download the Sena Motorcycles App at Huawei App Gallery, Tencent MyApp, or Store. Sena Motorcycles Download the following items at oem.sena.com/ava. Sena Device Manager • Firmware upgrade • Device configuration setting Quick Start Guide, User’s Guide AVA HELMETS...
Product Details Mesh Intercom Button (+) Button Center Button (-) Button Button Module Speaker Charging & Status LED Microphone Connector DC Power Charging & Firmware Upgrade Port Speaker Antenna...
Icon Legend Tap button the specified Press and Hold button for the HOLD number of times specified amount of time “Hello” Audible prompt Basic Operations Powering On Powering Off HOLD Volume Up Volume Down Checking the Battery Level Powering On...
Phone Pairing Blinking ① HOLD “Phone pairing” ② Select ABC in the list of Bluetooth devices detected. Bluetooth 국가는 노인과 청소년의 복지향상을 위한 정책을 실시할 의무를 진다. Device B • The headset will enter the Phone Pairing mode automatically when you initially turn on the headset.
Using the Phone Answer a Call End a Call HOLD Reject a call Call a Voice Assistant HOLD HOLD stand-by mode Music Control Play/Pause HOLD Track backward Track forward HOLD HOLD...
“ Mesh intercom on, Open Mesh, channel 1” Mesh Intercom Off “ Mesh intercom off” Note: When Mesh Intercom is on, the ABC will automatically connect to nearby ABC users and the headset will be in Open Mesh (default: channel 1) initially.
Page 11
① Enter into the Channel Setting. “ Channel setting, 1” ② Navigate between channels. ••• Exit •••) “ #” ③ Save the channel. “ Channel is set, channel #” Using the Sena Motorcycles App You can select the channel through the Sena Motorcycles App.
Page 12
Group Mesh Group Mesh is a closed group intercom function that allows users to join, leave, or rejoin a group intercom conversation without pairing each headset. 1) Creating a Group Mesh Creating a Group Mesh requires two or more Open Mesh users.
Page 13
2) Joining an Existing Group Mesh One of the current users in an Existing Group Mesh can allow users (one or more) in Open Mesh to join the Existing Group Mesh. Existing Group Mesh Open Mesh Existing Group Mesh One (You) of the current users in the Existing Group Mesh and ①...
Page 14
Enable/Disable Mic (Default: Enable) Users can enable/disable the microphone when communicating in a Mesh Intercom. HOLD Reset Mesh If a headset in an Open Mesh or Group Mesh resets the Mesh, it will automatically return to Open Mesh (default: channel 1). HOLD...
Troubleshooting Factory Reset ① HOLD “Configuration menu” ② “Factory reset” “ Headset reset, ③ good-bye” Fault Reset Note: Fault Reset will not restore the headset to the factory default settings.
Quick Reference TYPE OPERATION BUTTON COMMANDS HOLD Power on / Power off Basic Operations Volume up / Volume down Answer phone call HOLD End phone call Mobile HOLD Reject phone call Phone HOLD Call a Voice Assistant HOLD Play/Pause music HOLD Track forward Music...
Page 18
TYPE OPERATION BUTTON COMMANDS Mesh Intercom on/off Channel setting HOLD Mesh Grouping Mesh Intercom™ HOLD Reset Mesh HOLD Enable/Disable Mic 1.0.0_EN_March2023...