Related Manuals for Titan TTB873SDR
Summary of Contents for Titan TTB873SDR
- Page 1 900W Belt Sander TTB873SDR EAN: 5059340252285 WARNING: Read the instructions before using the product!
-
Page 2: Table Of Contents
Let’s get started These instructions are for your safety. Please read through them thoroughly before use and retain them for future reference. started... Getting Technical and legal information Your product Technical Before you start more detail... Product functions Operation Care and maintenance Troubleshooting Recycling and disposal Guarantee... - Page 3 TTB873SDR by TITAN Safety information Safety warnings General power tool safety warnings WARNING! Read all safety warnings, instructions, power tool. Failure to follow all instructions listed serious injury. Save all warnings and instructions for future reference. The term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery- operated (cordless) power tool.
- Page 4 Safety information TTB873SDR by TITAN Safety warnings b) Avoid body contact with earthed or grounded surfaces, pipes, radiators, ranges refrigerators. There is an increased risk of electric shock if your body is earthed or grounded. c) Do not expose power tools to rain or wet conditions.
- Page 5 TTB873SDR by TITAN Safety information c) Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source and/or battery pack, picking up or carrying the tool. switch or energising power tools that have the switch on invites accidents.
- Page 6 Safety information TTB873SDR by TITAN Safety warnings c) Disconnect the plug from the power source and/ or remove the battery pack, if detachable, from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.
- Page 7 TTB873SDR by TITAN Safety information 5) Service repair person using only identical replacement parts. This will ensure that safety of the power tool is maintained. Belt sander safety warnings Hold the power tool by insulated gripping surfaces, because the sanding surface may contact its own cord.
- Page 8 Safety information TTB873SDR by TITAN Safety warnings workpiece and the sander. Always empty the dust collector before taking a break from work. Sanding combust under certain conditions, for example if risk is increased if the sanding dust is mixed with...
- Page 9 TTB873SDR by TITAN Safety information Some wood and wood type products especially MDF (Medium Density Fibreboard) can produce dust that can be hazardous to your health. We recommend the this product in addition to using the dust extraction facility. k) Ensure that the trailing power cord of the tool remains clear of the tool at all times.
- Page 10 Safety information TTB873SDR by TITAN Safety warnings the development of Asthma. The risk of lung disease is linked to people who regularly breathe construction dust over a period of time, not on the odd occasion. To protect the lung, the COSHH Regulations sets a limit...
- Page 11 TTB873SDR by TITAN Safety information WARNING! Some dust particles created by power sanding, sawing, grinding, drilling and other construction jobs contain chemicals known to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are: • Lead from lead-based paints.
- Page 12 Safety information TTB873SDR by TITAN Safety warnings The declared vibration emission value has been measured in accordance EN 62841-1 and EN 62841-2-4 and may be used to compare one tool with another. The declared vibration emission value may also be used in a preliminary assessment of exposure.
- Page 13 TTB873SDR by TITAN Safety information WARNING! Identify safety measures to protect the operator that are based on an estimation of exposure in the actual conditions of use (taking account of all parts of the operating cycle such as the times when the tool is switched off and when it is running idle in addition to the trigger time).
- Page 14 Safety information TTB873SDR by TITAN Safety warnings c) Use correct attachments for the product and ensure they are in good condition. d) Keep tight grip on the handles/grip surface. e) Maintain this product in accordance with these instructions and keep it well lubricated (where appropriate).
- Page 15 TTB873SDR by TITAN Safety information Residual risks Even if you are operating this product in accordance with all the safety requirements, potential risks of injury and damage remain. The following dangers can arise in connection with the structure and design...
-
Page 16: Your Product
Your product TTB873SDR by TITAN Your product 1. Front handle 7. Tracking adjustment 11. Clamp lever 2. Speed dial knob 12. Drive roller* 3. On/off switch 8. Sanding belt 13. Power cord with plug 4. Lock-on button (pre-assembled) 14. Dust bag 5. - Page 17 TTB873SDR by TITAN General > Rated voltage, frequency 220-240 V~, 50 Hz > Rated input power 900 W > Rated no load speed n 200-380 min > Protection class > Weight approx. 3.6 kg > Sanding belt dimensions approx. 533 x 76 mm Sound values >...
- Page 18 TTB873SDR by TITAN Rating label explanation TTB873SDR = Model Number TT = TITAN B = 220 - 240V ~ 873 = Sequential Code SDR = Belt Sander Symbols others the following symbols and abbreviations. Familiarise yourself with them to reduce hazards like personal injuries and damage to property.
- Page 19 TTB873SDR by TITAN This product is of protection class II. That means it is equipped with enhanced or double insulation. The product complies with the applicable European directives and an evaluation method of conformity for these directives was done. UK Conformity Assessed.
-
Page 20: Before You Start
Before you start TTB873SDR by TITAN Setup WARNING! The product must be fully assembled before operation! Do not use a product that is only partly assembled or assembled with damaged parts! Follow the assembly instructions step-by-step and use the pictures... - Page 21 TTB873SDR by TITAN Before you start Fig. 2 3. Press the clamp lever (11) back in. Slightly pull on the sanding belt (8) to test if it sits properly in place (Fig. 3). Fig. 3 Belt position 1. Make sure the on/off switch (3) is in its off position. Then connect the plug with a suitable socket.
- Page 22 Before you start TTB873SDR by TITAN Sanding belt 5. Turn the tracking adjustment knob (7) anticlockwise to adjust the sanding belt (8) to the right (as seen from operator’s perspective) (Fig. 5). Fig. 5 6. Disconnect the product from the power supply before performing further assembly and adjustment.
- Page 23 TTB873SDR by TITAN Before you start Dust bag Attaching/Removing 1. Align the dust bag connector (14a) with the dust extraction outlet (6). 2. Attach the dust bag (14) onto the outlet (6) all the way to the stop (Fig. 7).
- Page 24 Before you start TTB873SDR by TITAN Connection to power supply 1. Make sure the on/off switch (3) is in its off position. 2. Connect the plug with a suitable socket. WARNING! Check the voltage! The voltage must comply with the information on the rating label! 3.
-
Page 25: In More Detail
TTB873SDR by TITAN more detail... Product functions Operation Care and maintenance Troubleshooting Recycling and disposal Guarantee EC declaration of conformity... - Page 26 TTB873SDR by TITAN Intended use This belt sander TITAN TTB876PLN is designated with a rated input of 900 Watts. This product is intended for sanding the following materials: wood, plastic, metal, materials or those harmful to health. It is to be used for dry operation only without water or other cooling liquids.
- Page 27 TTB873SDR by TITAN Product functions / Operation Switching on/off Operate the product either in instant or continuous mode. Instant mode 1. Switch the product on by pressing the on/off switch (3) (Fig. 13). Continuous mode 1. Switch the product on by pressing the on/off switch (3) and hold it in position (Fig.
- Page 28 Operation TTB873SDR by TITAN Sanding WARNING! Always use a dust extraction system and wear a dust mask to protect WARNING! Always ensure that the power cable stays behind the tool and remains clear of the rotating belt. Snagging of power cable in sanding belt can cause serious injury or electrocution.
- Page 29 TTB873SDR by TITAN Operation / Care and maintenance After use 1. Switch the product off, disconnect it from the power supply and let it cool down. 2. Check, clean and store the product as described below. The golden rules for care...
- Page 30 Care and maintenance TTB873SDR by TITAN Maintenance Before and after each use, check the product and accessories (or attachments) for wear and damage. If required, exchange them for new ones as described in this instruction manual. Observe the technical requirements.
- Page 31 TTB873SDR by TITAN Care and maintenance NOTE: care in disposing of the plug and severed cable, it must be destroyed to prevent engaging into a socket. Repair This product does not contain any parts that can be repaired by the consumer.
-
Page 32: Troubleshooting
Troubleshooting TTB873SDR by TITAN Troubleshooting Therefore check the product using this section. In most cases the problem can be solved quickly. WARNING! Only perform the steps described within these instructions! All further inspection, maintenance and repair work must be performed... -
Page 33: Recycling And Disposal
TTB873SDR by TITAN Recycling and disposal Recycling and disposal Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or local store for recycling advice. For further information visit www.recycle-more.co.uk. -
Page 34: Guarantee
We take special care to select high quality materials and use manufacturing techniques that allow us to create products incorporating design and durability. This product (TITAN 900W Belt Sander) has a manufacturer’s guarantee of 2 years against manufacturing defects, from the date of purchase (if bought in store) or date of delivery (if bought online), at no additional cost for normal (non- professional or commercial) household use. -
Page 35: Ec Declaration Of Conformity
TTB873SDR by TITAN EC declaration of conformity (EN) EU DECLARATION OF CONFORMITY (FR) DÉCLARATION UE DE CONFORMITÉ (PL) DEKLARACJA ZGODNOŚCI UE (RO) DECLARA IA DE CONFORMITATE UE (ES) DECLARACIÓN UE DE CONFORMIDAD (PT) DECLARAÇÃO DE CONFORMIDADE UE Product/ Produit/ Produkt/Produsul/Produkt/Producto/Produto •... - Page 36 EC declaration of conformity TTB873SDR by TITAN echipamentele electrice și electronice y electrónicos 2006/42/CE como diretiva de máquinas alteradas 2014/30/UE como alteração da compatibilidade eletromagnétic 2011/65/UE como restrição diretiva alterada da utilização de certas substâncias perigosas em equipamentos elétricos e eletrónicos relation to which conformity is declared: Références des normes harmonisées pertinentes appliquées, y compris la date de celles-ci, ou des autres...
- Page 37 TTB873SDR by TITAN EC declaration of conformity (UK) DECLARATION OF CONFORMITY Product • 900W Belt Sander • TTB873SDR • Serial number: 00001 to 99999 Name and address of the manufacturer or his authorised representative: 3 Sheldon Square London W2 6PX United Kingdom This declaration of conformity is issued under the sole responsibility of the manufacturer.
- Page 38 Manufacturer,Fabricant,Producent,Producător,Fabricante: UK Manufacturer: Kingfisher International Products Limited 3 Sheldon Square, London, W2 6PX United Kingdom www.kingfisher.com/products EU Manufacturer: Kingfisher International Products B.V. Rapenburgerstraat 175E 1011 VM Amsterdam The Netherlands www.kingfisher.com/products www.screwfix.com To view instruction manuals online, visit www.screwfix.ie www.kingfisher.com/products www.bricodepot.fr Pour consulter les manuels d’instructions en ligne, rendez-vous sur le site www.kingfisher.com/products www.bricodepot.es...