File Menu - Anritsu Spectrum Master MS2721B User Manual

4-4 File Menu

4-4 File Menu
Key Sequence: File
Save Measurement As: This key will save the current setup with a user
defined file name. The default file name is changed using the Save submenu.
File
To change the default file name, press the Save Measurement submenu key
Save Measurement As
to open the Save dialog box. Enter the new measurement filename with the
letter keys. Refer to
FileName.spa
and return to the File menu. The Save Measurement As submenu key
Save
displays the new entered name appended with _#1.spa. After a few seconds
the screen with return to File menu. Press the Save Measurement As key
Measurement
again and the new file name will be used. Measurement files names have a
.spa extension.
Save
Save Measurement: Press this submenu key to display the
on page 4-7
Save
memory or to a USB flash drive. The saved measurement can be named
On
using the text entry keys. By default, measurements are saved in a directory
Event
named /user to internal memory. The save destination is set with the
"Save Location Menu" on page
Recall
Save: Press this submenu key to display the
Measurement
Measurements can be saved to internal memory or to a USB flash drive. The
saved setup, measurement, or JPEG file can be named by using the text
Recall Recall entry keys. By default, measurements are saved in a directory named /user to
internal memory. The save destination is set with the
on page
Copy
Save on Event (Spectrum Analyzer mode only): Press this submenu key to
display the
Recall Measurement: Press this submenu key to display the
Delete
on page
or a USB flash drive.
Recall: Press this submenu key to display the
This menu is for recalling measurement or setup data from internal memory or
a USB flash drive.
Copy: Press this submenu key to display the
This submenu is for copying files or folders from internal memory or a USB
flash drive.
Delete: Press this submenu key to display the
and a selection box that shows the setup and measurement names, the type
and the date and time that the information was saved. Use the rotary knob or
the Up/Down arrow keys to highlight the file that is to be deleted and press
the Delete submenu key, then Enter. Press the Esc key to cancel the
operation. Note that deleted files can not be recovered.
Figure 4-5. File Menu
4-6
"Save Menu" on page
and Save dialog box. Measurements can be saved to internal
4-8.
"Save On Event Menu" on page
4-10. This menu is for recalling measurements from internal memory
PN: 10580-00175 Rev. N
Chapter 4 — File Management
4-7. Press Enter to save the name
4-8.
"Save Menu" on page
4-9.
"Recall Menu" on page
"Copy Menu" on page
"Delete Menu" on page 4-12
"Save Menu"
4-7.
"Save Location Menu"
"Recall Menu"
4-10.
4-11.
MS272xB + MS8911B UG