Yamato DN411I Quick Start Manual

Model V Control Panel Quick Start Guide
Units:

【Operation Modes】

◆Refer to standard instruction manual for further details
Main power
switch ON
Idle screen
CLOCK
Press & hold
Standby Screen
◆Startup screen defaults to mode last used.
◆To clear values entered in error, press
FIXED TEMP
MODE
Mode select:
Constant (FIXED) Temp
Set Temperature
Standby Screen
◆Upon setting completion, standby screen is restored.
START
Start operation
STOP
Operation Screen
DN411I, DN611I
(does not apply after pressing
FIXED TEMP
AUTO START
MODE
TIME
TIME
Mode Select:
Auto Start
TIME
CLOCK
Select timer (TIME
or CLOCK)
TIME
CLOCK
Set Timer (TIME
or CLOCK)
TIME
CLOCK
Enter Temperature
).
FIXED TEMP
AUTO STOP PROGRAM
MODE
Mode Select:
Auto Stop
Select timer (TIME
or CLOCK)
◆Program must be entered prior to
Set timer (TIME
or CLOCK)
Enter Temperature
PROGRAM
AUTO START
MODE
TIME
Mode Select: Mode Select:
Program+Auto Start
Program
TIME
Select program No. Select timer (TIME
or CLOCK)
running programmed operation.
See back of this quick start guide
or standard instruction manual for
details.
TIME
Set timer (TIME
or CLOCK)
TIME
Select program No.
MODE
Repeat
◆Program must be entered prior to
running programmed operation.
See back of this quick start guide
or standard instruction manual for
details.
Ver.1.0