Connection
6.2 Power supply
Restricted area of application
This equipment is suitable for use in Class I, Zone 2, Group IIC or non-hazardous locations only.
6.2
Power supply
Impermissible power supply
Never operate the device with AC voltage or DC voltage higher than 32 V DC.
Note
The device can be disconnected from the power supply by removing the terminal block.
The power supply is connected using a 5-pin plug-in terminal block. The power supply is
non-floating.
Contact
L1+
M1
M2
50
WARNING
WARNING
Assignment
24 VDC
Ground
Ground
Operating Instructions, 03/2023, C79000-G8976-C650-05
SCALANCE MUM853-1