STYLEX Metrum Disassembly And Recycling Document

Model: Metrum one seater
*Refer to P.2 for model variations

Tools Required

safety glasses
phillips screwdriver
3/8 wrench with extension
7/16 wrench (for arms)

Breakdown Steps

1. Turn the chair on its side (or back if a
large unit) to reveal the metal legs.
Locate the 4 legs.
3. Using a phillips head screw driver or
drill, remove all screws from the frame,
releasing the legs from the seat wood
(figure B1).
3. To remove the back frame from the
seat, locate the hex bolts towards the
back of the seat. Using a 3/8 wrench,
uncrew each of the bolts.
4. Finally, release the back from the seat.
www.stylexseating.com
Disassembly and Recycling Document
Disassembly Time:10min / No Special Training Required
A1
B1
C1
D1
- Back cushion
- Material:
Foam, plywood, upholstery
- Seat cushion
- Material:
Foam, plywood, upholstery
- Legs
- Material: Aluminum
Wood Leg optional
x4
-Phillips round head
(1/4 20)
Material: Steel x4
-Washer x6Per seat
-Hex Washer Bolt
x6Per seat
(1/4 20)
Material: Steel
800.257.5742
P.1
Disassembly Metrum 00 12/17/18