Cleaning And Maintenance; Cleaning Clearchart 2; Fuse Replacement - Ametek Reichert ClearChart2 User Manual

Cleaning & Maintenance

Cleaning ClearChart 2

Use a lint-free, soft cloth lightly damped with 90% Isopropyl Alcohol to clean the
ClearChart 2 screen and the unit. Cleaning of the ClearChart 2 should be performed
when the screen is has contaminants on it or when visually, there is dust accumulation
on the instrument.
CAUTION: DO NOT USE AMMONIA-BASED WINDOW CLEANERS. DO NOT USE PAPER
TOWELS.

Fuse Replacement

WARNING: DISCONNECT POWER BEFORE ATTEMPTING TO REMOVE THE FUSES OR
SERIOUS INJURY OR DEATH MAY OCCUR.
Replace the fuses in the Power Input Module with the fuses indicated in the
Specifications section of this manual.
1. Remove input power to the
instrument and press down on
the tab in the middle of the Power
Input Module to release the Fuse
Holder. Refer to item 1.
2. Pull the fuse holder out of the input
module. Refer to item 2.
3. Install new fuses that are indicated
in the Specification section of this
manual into the Fuse Holder.
4. Push the Fuse Holder into the
Power Input Module until it snaps
into place.
ClearChart 2 Digital Acuity System User's Guide 13760-101 Rev. H
Fuse Removal
33