Guidance And Manufacturer's Declarations - Ametek Reichert ClearChart2 User Manual

Guidance & Manufacturer's
Declarations
Table 201 – Guidance and Manufacturer's Declaration
Electromagnetic Emissions
Guidance and Manufacturer's Declaration – Electromagnetic Emissions
The ClearChart 2 is intended for use in the electromagnetic environment specified below. The
customer or user of the ClearChart 2 should ensure that it is used in such an environment.
Emissions Test
RF Emissions
CISPR 11
Harmonics
IEC 61000-3-2
Flicker
IEC 61000-3-3
ClearChart 2 Digital Acuity System User's Guide 13760-101 Rev. H
All Equipment and Systems
Compliance
The ClearChart 2 uses RF energy only for its internal
Group 1 function. Therefore, its RF emissions are very low
Class A and are not likely to cause any interference in nearby
electronic equipment.
Class A
The ClearChart 2 is suitable for use in all establish-
ments, including domestic establishments and those
directly connected to the public low-voltage power sup-
Complies
ply network that supplies building for domestic power.
Electromagnetic Environment
- Guidance -
37