Configuring The Clearchart 2 - Ametek Reichert ClearChart2 User Manual

Installation, Features, & Functions
(continued)

Configuring the ClearChart 2

Press the ON/OFF switch located on the side of the instrument. The ClearChart 2 will
boot-up. When the ClearChart 2 welcome screen appears, press the MENU button
on the remote to enter the configuration mode. Use the UP and DOWN arrows to
navigate through different options.
ROOM
Using the LEFT/RIGHT arrows on your remote, select DIRECT THROW or
MIRRORED based on the configuration of your office. When you are finished, press
the DOWN arrow.
Using the LEFT/RIGHT arrows on your remote, select METRIC or ENGLISH units
based on which units you use to measure your refraction distance. When you are
finished, press the DOWN arrow.
Patient to Screen Distance
Direct Throw
Mirror Set Up
14
ClearChart 2 Digital Acuity System User's Guide 13760-101 Rev. H