Steps
1. Align and place the infrared camera module into the slot on the display back cover.
2. Connect the infrared camera cable to the connector on the infrared camera module.
Next steps
1. Install the
display
hinges.
2. Install the
display
panel.
3. Install the
display
bezel.
4. Install the
display
assembly.
5. Install the
base
cover.
6. Install the
microSD
card.
7. Install the
SIM
card.
8. Follow the procedure in
eDP/display cable
Removing the eDP cable
Prerequisites
1. Follow the procedure in
2. Remove the
SIM
card.
3. Remove the
microSD
4. Remove the
base
cover.
5. Remove the
display
assembly.
6. Remove the
display
bezel.
7. Remove the
display
panel.
About this task
The following images indicate the location of the eDP cable and provide a visual representation of the removal procedure.
96
Removing and installing components
after working inside your
before working inside your
card.
computer.
computer.