Installing The Edp Cable - Dell P104F Service Manual
Hide thumbs
Also See for P104F:
- Service manual (147 pages) ,
- Technical manualbook (57 pages) ,
- Setup and specifications (33 pages)
Table of Contents
Advertisement
Steps
1. Disconnect the eDP cable from the connector on the camera module.
2. Peel the conductive tape and unroute the eDP cable to release it from adhesive and lift the eDP cable from the display back
cover.
Installing the eDP cable
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the eDP cable and provides a visual representation of the installation procedure.
Removing and installing components
97
Advertisement
Table of Contents
