Steps
1. Align and place the power-button board on the palm-rest assembly.
2. Replace the two screws (M2x2) that secure the power-button board to the palm-rest assembly.
Next steps
1. Install the
system
board.
NOTE:
The system board can be installed with the heat sink attached in order to simplify the procedure and preserve
the thermal bond between the system board and heat sink.
2. Install the
assembly inner
3. Install the
system
fan.
4. Install the
3-cell battery
5. Install the
WWAN
card.
6. Install the
WLAN
card.
7. Install the
memory
module.
8. Install the
M.2 2280 solid-state drive
9. Install the
base
cover.
10. Install the
microSD
card.
11. Install the
SIM
card.
12. Follow the procedure in
70
Removing and installing components
frame.
or
4-cell
battery.
or
M.2 2230 solid-state
after working inside your
drive.
computer.