Chapter 2: Removing And Installing Components; Recommended Tools; Screw List - Dell P104F Service Manual

Removing and installing components
NOTE: The images in this document may differ from your computer depending on the configuration you ordered.

Recommended tools

The procedures in this document may require the following tools:
● Phillips screwdriver #0
● Plastic scribe

Screw list

NOTE: When removing screws from a component, it is recommended to note the screw type, the quantity of screws, and
then place them in a screw storage box. This is to ensure that the correct number of screws and correct screw type is
restored when the component is replaced.
NOTE: Some computers have magnetic surfaces. Ensure that the screws are not left attached to such surfaces when
replacing a component.
NOTE: Screw color may vary with the configuration ordered.
Table 1. Screw list
Component
Base cover
WLAN
WWAN
M.2 2230 solid-state drive
M.2 2280 solid-state drive
Assembly inner frame
3-cell battery
4-cell battery
Heat sink-integrated
Heat sink-discrete
Screw type
Captive screw
Captive screw
Captive screw
M2x4
M2x4
M2x3
Captive screws
Captive screws
Captive screw
M2x3
Captive screw
M2x3
Quantity
8
1
1
1
1
12
3
3
4
1
7
1
Removing and installing components
Screw image
N/A
N/A
N/A
N/A
N/A
2
11