Dell P104F Service Manual page 115

Table 12. System setup options—Security menu (continued)
Security
Intel Total Memory Encryption
Total Memory Encryption
Chassis intrusion
SMM Security Mitigation
Data Wipe on Next Boot
Start Data Wipe
Absolute
UEFI Boot Path Security
Table 13. System setup options—Passwords menu
Passwords
Admin Password
System Password
NVMe SSD0
Password Configuration
Upper Case Letter
Lower Case Letter
Digit
Special Character
Minimum Characters
Password Bypass
Password Changes
Enable Non-Admin Password Changes
By default, the PPI ByPass for clear Commands option is disabled.
Enable or disable you to protect memory from physical attacks including freeze
spray, probing DDR to read the cycles, and others.
By default, the Total Memory Encryption option is disabled.
Controls the chassis intrusion feature.
By default, the On-Silent option is enabled.
Enable or disable SMM Security Mitigation.
By default, the option is enabled.
Enable or disable the data wipe on next boot.
By default, the option is enabled.
Enable or disable or permanently disable the BIOS module interface of the
optional Absolute Persistence Module service from Absolute software.
By default, the option is enabled.
Controls whether or not the computer will prompt the user to enter the admin
password (if set) when booting to a UEFI boot device from the F12 boot menu.
By default, the Always Except Internal HDD option is enabled.
Set, change, or delete the administrator password.
Set, change, or delete the computer password.
Set, change, or delete the NVMe SSD0 password.
Reinforces password must have at least one upper case letter.
By default, the option is disabled.
Reinforces password must have at least one lower case letter.
By default, the option is disabled.
Reinforces password must have at least one digit.
By default, the option is disabled.
Reinforces password must have at least one special character.
By default, the option is disabled.
Set the minimum characters allowed for password.
When enabled, this always prompts for computer and internal hard drive
passwords when powered on from the off state.
By default, the Disabled option is enabled.
Enable or disable to change computer and hard drive password without the
need for admin password.
BIOS setup 115