Uplift Desk Starling CHR464 Quick Start Manual

Package Contents

Seat
360°
UPLIFT Desk • 1-800-349-3839 • info@upliftdesk.com • www.upliftdesk.com
®
Starling Stool
CHR464
Cylinder
Neck

Step 1

The Cylinder arrives with a plastic cap that protects the gas re-
lease button during shipment. Remove and dispose of it.
Warning: This cap MUST be removed. Leaving it on may damage
the stool during assembly.

Step 2

Place the larger end of the Neck on the open hole underneath
the Seat.
Press down firmly until you feel the Neck snap into place. If
there is a gap where the parts join, press down firmly again to
ensure that both parts are connected completely before mov-
ing on to the next step.

Step 3

Place the Base collar into the open spot on the Base.
Next, place the Cylinder into the Base assembly and press
down until the Base collar fits snugly on the cylinder.
Then insert the Seat/Neck assembly onto the Cylinder, pushing
it down to secure it in place.

Step 4

The stool is now ready to use. Your seat height can be adjusted
by pressing one of the two levers found on either side of the
seat.
The seat rotates 360° from a central point on the base and tilts
10° in all directions from the base.
Base collar Base
AI-CHR464-1.1