Uplift Desk CHR457 Instructions

Package Contents:

21''-32.25''
14.25''
14''
15.5''
22.2''
UPLIFT Desk • 1-800-349-3839 • info@upliftdesk.com • www.upliftdesk.com
®
E7 Stool
CHR457
Seat Cylinder

Step 1

The Cylinder comes with a plastic cap that protects the gas-release button
during shipment. Remove this plastic cap from the end of the Cylinder and
dispose of it.

Step 2

Place the narrow end of the Cylinder into the hole in the bottom of the Seat.

Step 3

Prepare to insert the Seat assembly into the Base. Align the front of the
Seat parallel with the front of the Base before inserting the Cylinder into
the Base.
NOTE: Once installed, the cylinder CANNOT be removed or adjusted!
If the two pieces are not parallel with each other, the seat will not be
lined up when you sit on it.
With the Seat assembly lined up with the Base, insert the bottom of the
Cylinder into the Base.

Step 4

The E7 Stool's weight capacity is 250 lbs.
The 360° tilting, rotating and pivoting stool encourages movement and
good posture while seated thanks to multiple modes of adjustability.
Seat height is adjusted by a button under the front corner on either side.
Its adjustment range is 21'' to 32.25''.
The stool features an ergonomic handle on the back of the seat for
portability.
Base
CHR457/R02