Mocka Eclipse Four Drawer Assembly Instructions Manual page 11

Eclipse
Four Drawer
19
V
Z
W
Attach 8x wedges (J) into the corners of the back of the unit and secure with
8x screws (K). Tighten with a screwdriver. Attach 1x safety straps (V) to the top
of the back side of the unit as shown using 1x washers (Z) and 1x screws (W).
Tighten with a screwdriver.
mocka.co.nz I mocka.com.au I PO BOX 18, Pinkenba QLD 4008
J
K
V
Z
W
9
9
20
X
Z
Y
Once assembled lift furniture into place, do not drag. Use a drill to
create a small hole lining up with the top of the safety strap (V).
Fasten to the wall using 1x washers (Z), 1x wall anchor (X) and 1x wall
screw (Y). Ensure unit is balanced and steady before use.
You're done, enjoy!
strap
wall
anchor
screw