2-7. Vehicle settings
●
If the system needs to be restarted, a message will appear. Touching
[Yes]
[OT.0.E648-A_1]
●
To check the software update history, touch [History]
software update history screen.
■
Manually updating the software
1. Touch [
[zzcn99bt008a]
2. Touch [Software update]
3. Touch [View]
[OT.0.6D49-U_4]
4. Follow the on-screen instructions to check and agree to the update
content and terms.
●
Downloading of the update data will start. Once the data has been
downloaded, installation will begin. (This will take about 10 to 15
minutes)
●
The time required for download and installation may increase depend-
ing on the communications environment. If you turn off the power
switch while the software is installing, installation will resume the next
time the vehicle is started.
●
Once the update is complete, a message is displayed on the screen.
●
If the system needs to be restarted, a message will appear. Touching
[Yes]
[OT.0.E648-A_1]
●
To check the software update history, touch [History]
software update history screen.
INFORMATION
●
If critical update data is available on the distribution server, a message will be
displayed. Touch [OK]
●
The following conditions must be met to use Wi-Fi
•
The system must be connected to a Wi-Fi
etc.)
•
The vehicle must be in a location where is can access Wi-Fi
•
The communications settings must be set to [Wi-Fi]
74
OM12Q74E
restarts the system.
] from the main menu.
[UP.0.0D48-E_1]
of "Updates available"
restarts the system.
to download the update data.
[OT.0.6D4B-A_2]
on the submenu.
[OT.0.6D49-U_6]
®
to update the software:
®
access point (e.g. home, work,
[UP.0.3B56-1]
on the
[OT.0.394A-U_2]
.
on the
[OT.0.394A-U_2]
®