Toyota Corolla 2023 Owner's Manual page 127

INFORMATION
●
While Apple CarPlay is connected, press and hold the talk switch to start
Siri. To cancel Siri, perform a short press of the talk switch.
●
While [Wake word]
speaking the Siri wake word will start Siri.
The wake word function of Siri can only be used when the language is set to
English. Also, the connected device must have iOS version 14.3 or later.
●
If wireless connection is set to be used on the smartphone when registered
via USB connection, wireless connection will be enabled from the next time
onwards.
Related Links
Connecting the USB port(P. 38)
Voice control system(P. 41)
Changing the voice control settings(P. 67)
Using Apple CarPlay with wireless connection
Apple CarPlay can be connected to the multimedia system wirelessly using
vehicle's wireless connection capability.
1 Enable Siri from your smartphone's settings menu.
2 Touch [
[zzcn99bt008a]
3 Touch [Bluetooth & Devices]
●
The device search screen will be displayed if there is no smartphone regis-
tered to the multimedia system. Proceed to Procedure 5.
4 Touch [Add another device]
5 Touch [If not found]
6 Select the smartphone to register.
7 Check that the displayed PIN code matches the PIN code displayed
on the smartphone, and then touch [OK]
●
Perform the operation according to the guidance on the screen.
8 If Apple CarPlay settings are displayed, touch [Yes]
●
The Apple CarPlay home screen is displayed.
●
It may take around 3 to 6 seconds to return to the original screen, depending
on the smartphone being connected.
●
If an operation failed screen is displayed, follow the operation instructions on
the screen.
●
If guidance is displayed on the smartphone screen, follow those operation
instructions.
3-3. Using Apple CarPlay and Android Auto
is set to on and Apple CarPlay is connected,
[UP.1.E34A-F_3]
] from the main menu.
[UP.1.9D18-Z_2]
[UP.1.0338-M_1]
.
[UP.1.0349-H_2]
wvw1659340253986.dita
on the submenu.
.
.
[UP.0.004A-B_1]
[UP.0.0029-F_1_1]
OM12Q74E
3
.
125