Toyota Corolla 2023 Owner's Manual page 110

3-1. Using the Bluetooth
Registering from a Bluetooth
®
If the Bluetooth device cannot be found by searching with the multimedia
system, register by searching for the multimedia system from the Blue-
®
tooth device.
1 Touch [
[zzcn99bt008a]
2 Touch [Bluetooth & Devices]
If no device is registered, proceed to Procedure 4.
3 Touch [Add another device]
While a device is connected to the multimedia system, the confirmation screen
for disconnecting the device may be displayed. Disconnect the device to perform
registration.
4 Register the multimedia system
from the Bluetooth
be used.
●
Perform the operation according to
the operating procedure of the Blue-
®
tooth device.
●
Be sure to display this Bluetooth
connection screen before perform-
ing registration on the Bluetooth
device.
5 Check that the displayed PIN code matches the PIN code displayed
on the Bluetooth
●
Some Bluetooth
●
Primary device settings may be displayed. Perform the operation according to
the screen guidance.
●
Apple CarPlay settings may be displayed. The Apple CarPlay screen will be
displayed if use is enabled.
●
A message indicating that connection is complete is displayed, and the name
of the registered Bluetooth
●
If an operation failed screen is displayed, follow the operation instructions on
the screen.
Related Links
Registering a driver(P. 50)
Changing and registering a driver(P. 57)
Precautions when using Apple CarPlay and Android Auto(P. 121)
108
OM12Q74E
®
function
®
] from the main menu.
[UP.1.9D18-Z_2]
[UP.1.0338-M_1]
®
device to
®
®
®
device, and then touch [OK]
®
devices may need to be operated to complete registration.
®
device is displayed in the submenu.
device
on the submenu.
.
[UP.0.004A-B_1]
sah1659340253657.dita
[encs03bt001a]
.