■
When any part of the vehicle sags
When any part of the vehicle sags
due to the number of passengers or
the distribution of the load, there is
a margin of error between the fixed
guide lines on the screen and the ac-
tual distance/course on the road.
A margin of error
A
When approaching three-dimensional objects
The distance guide lines are displayed according to flat surfaced objects
(such as the road). It is not possible to determine the position of three-di-
mensional objects (such as vehicles) using the vehicle width guide lines
and distance guide lines. When approaching a three-dimensional object
that extends outward (such as the flatbed of a truck), be careful of the
following.
■
Vehicle width guide lines
Visually check the surroundings and
the area behind the vehicle. In the
case shown below, the truck appears
to be outside of the vehicle width
guide lines and the vehicle does not
look as if it hits the truck. However,
the rear body of the truck may actual-
ly cross over the vehicle width guide
lines. In reality if you back up as guid-
ed by the vehicle width guide lines,
the vehicle may hit the truck.
Vehicle width guide lines
A
8-1. Rear view monitor system
daa1659340475370.dita
OM12Q74E
[zzcn09bt136a]
8
[zzcn09bt137a]
259