2
Touch [Bluetooth & Devices]
If no device is registered, proceed to Procedure 4.
3
Touch [Add another device]
While a device is connected to the multimedia system, the confirmation screen
for disconnecting the device may be displayed. Disconnect the device to perform
registration.
4
Touch [If not found]
5
Touch the device to register from the main area.
®
●
The Bluetooth
●
If the device to register is not displayed in the main area, try registering from
®
the Bluetooth
●
Certain models of Bluetooth
unless a certain screen is displayed on the Bluetooth
®
Bluetooth
device's instruction manual for details.
6
Check that the displayed PIN code matches the PIN code displayed
on the Bluetooth
●
Some Bluetooth
●
Primary device settings may be displayed. Perform the operation according to
the screen guidance.
●
Apple CarPlay settings may be displayed. The Apple CarPlay screen will be
displayed if use is enabled.
●
A message indicating that connection is complete is displayed, and the name
of the registered Bluetooth
●
If an operation failed screen is displayed, follow the operation instructions on
the screen.
Related Links
Registering a driver(P. 50)
Changing and registering a driver(P. 57)
Precautions when using Apple CarPlay and Android Auto(P. 121)
[UP.1.9D18-Z_2]
[UP.1.0338-M_1]
.
[UP.1.0349-H_2]
address may be displayed instead of the device name.
device.
®
devices may not be displayed in the device list,
®
device, and then touch [OK]
®
devices may need to be operated to complete registration.
®
device is displayed in the submenu.
3-1. Using the Bluetooth
on the submenu.
.
®
device. Refer to the
[UP.0.004A-B_1]
OM12Q74E
®
function
[encs03bt001a]
.
107
3