Connecting With A Blue- Tooth ® Device - Toyota Corolla 2023 Owner's Manual

3-1. Using the Bluetooth
Connecting with a Bluetooth
Connection with a Bluetooth
the multimedia system. There are two connection methods, automatic and
manual.
INFORMATION
●
Refer to the Bluetooth
operate the Bluetooth
●
If behavior is unstable when connecting a cellular phone, disconnect the call
and try connecting again.
●
A connection cannot be made if Bluetooth
turned on.
●
When connection of the Bluetooth
so will be displayed at the top of the screen.
●
While the Bluetooth
icon is displayed.
●
The display area may illuminate and stay on while the power switch is turned
on, depending on the model of cellular phone. If this occurs, turn illumination
off on the cellular phone. (For information on setting, refer to the cellular phone
instruction manual)
®
●
The Bluetooth
CarPlay.
®
●
The Bluetooth
device connected as Android Auto.
®
●
Miracast audio may skip if a Bluetooth
®
Miracast .
®
■
Bluetooth reconnection
®
If a Bluetooth connection that was once established is disconnected while
the power switch is turned on, a reconnection will be automatically attempt-
ed.
■
Number of Bluetooth
● When the driver is identified
Up to 2 hands-free phones and 1 audio device will be connected auto-
matically. (The hands-free phone and audio device can also be set as the
same device.)
● When the driver is not identified
110
OM12Q74E
®
function
®
device is required to use various function of
®
device's instruction manual for information on how to
®
device.
®
®
device is connected, the Bluetooth
function cannot be used on the device connected as Apple
function except the hands-free function cannot be used on the
®
device connections
®
device
®
on the Bluetooth
device is completed, a message indicating
®
device is connected while using
cgl1659340253736.dita
®
device is not
®
connection status