3-2. Connecting to a Wi-Fi
Connecting to a network using Wi-Fi
The multimedia system can be connected to the Internet by connecting to a
®
Wi-Fi
network.
INFORMATION
●
The reception level is displayed at the top of the screen.
●
Cannot be used if Apple CarPlay with wireless connection.
●
Some smartphone models may require establishing a connection each time.
●
If networks are detected while the Wi-Fi
will prioritize connecting to the network with the most recent connection.
Related Links
®
Changing Wi-Fi
Connecting to Wi-Fi
Refer to the following operation example to establish a Wi-Fi
using a smartphone that supports Wi-Fi
tethering, refer to documents such as the instruction manual for the smart-
phone. Some smartphone models may require establishing a connection
each time.
1
Touch [
[zzcn99bt008a]
2
Touch [Wi-Fi]
[UP.0.3B56-1]
3
Set [Wi-Fi]
[UP.0.3B56-H_2]
area to on.
●
A message may be displayed de-
pending on the multimedia system
settings. Perform the operation ac-
cording to the screen guidance.
●
Turning on [Wi-Fi]
display nearby networks that are
available.
4
Select the name of the network that matches the name being
broadcasted by the smartphone.
●
Network name may display as duplicate when more than one MAC address
shares the same network.
●
A maximum of 30 networks can be displayed. The list is automatically updat-
ed every 6 seconds.
118
OM12Q74E
®
network
settings(P. 94)
®
using a smartphone
] from the main menu.
on the submenu.
in the main
will
[UP.0.3B56-H_2]
®
®
function is on, automatic connection
®
tethering. For details on setting up
ewv1659340253548.dita
swt1659340253954.dita
®
connection
[encs02bt019a]