Touch Control; Functionalities; Motor Control - Venduro TA Series User Manual

Functionalities

A� Light button
B� Motor button
C� Filter indicator
D� Fan speed

Motor Control

Press button B to switch
on the motor to position 1� Press button B again to increase the speed by 1 position� If
the motor is already in the boost position, renewed pressing of B will switch off the motor
again� The sequence of motor positions is 1, 2, 3, boost, OFF, 1, 2, ...
The boost speed only remains active for 10 minutes, after which the suction is reduced
to position 3
OFF
motor will not operate until the slide
section is extended

Touch Control

Position 1 Position 2 Position 3 Boost
ENG
33