Rf Remote Control; Functionalities; Motor Control; Run-On Time - Venduro RA MM-ZM User Manual

RF Remote Control

Functionalities

A� Light ON/OFF
B� Lighting +
C� Lighting -
D� Motor ON/OFF
E� Motor +
F� Motor -
G� Filter indicator
H� Fan speed

Motor Control

Switch on the motor by pressing the
button D or E� Pressing button E switches the motor to position 1; pressing button E and
F varies the motor speed between 1, 2, 3 and boost� Pressing button F in position 1 or
pressing button E in boost does not have
any effect. If you switch off the motor
by pressing button D, and if you later
switch it on using that same button, then
the motor will revert to its last operating
position�
The boost speed will only last for 10
minutes, after which the appliance will
reduce the extraction level to position 3�

Run-on Time

Activate the run-on time by an extended
press on button D whilst the motor is
running� The motor will then switch back
to position 1 for 10 minutes�
G
A
B
C
H
D
E
F
OFF<
Position 1
Position 2
Position 3
Boost
41
ENG