Run-On Timer; Light; Filter Indicator; Reset Filter Indicator - Venduro TA Series User Manual

Run-on Timer

ENG
Whilst the motor is running, activate the run-on timer by prolonged pressing of button B�
The motor will then switch back to position 1 for 10 minutes�

Light

Switch the light ON/OFF by briefly pressing button A. Press and hold down button A to
dim the light� When the light is at its minimum, the light will switch back to maximum�
Consequently, if the user keeps dimming the light, the light will continuously dim bet-
ween its minimum and maximum setting�

Filter Indicator

The filter will need cleaning when the motor has been operating for a certain time. The
filter indicator on the touch interface will light up to notify the user that the filter has timed
out. The filter time-out can only be reset when the filter time has effectively expired.
Filter does not need cleaning� Filter needs cleaning�

Reset Filter Indicator

Use the touch control to reset the filter indicator by simultaneously pressing the light
button (A) and fan button (B) for 3 seconds�

Cleaning and Maintenance

General Maintenance

The cooker hood will need cleaning after a certain period of time� A build-up of grease
within the cooker hood can catch fire and will also reduce the performance of the cooker
hood�

Stainless Steel

This can be cleaned with a stainless steel cleaning product� Do not use any abrasive or
acidic products�

Lacquered Components

These can be cleaned using a mild cleaning product� Do not use any abrasive or acidic
products�

Handy Tip

You can keep the cooker hood system clean by letting a cooking pan filled with water,
lemon juice and a glass of vinegar boil for approx� 20 minutes with the cooker hood
34