Webasto Thermo To Evo Parking Heater Manual page 40

Audi A3 / A3 Convertible
WARNING!
Reassemble the disassembled components in reverse order. Check all hoses, clamps and all electrical
connections for firm seating. Insulate and tie back all loose lines.
Only use manufacturer-approved coolant. Spray the heater components with anti-corrosion wax
(Tectyl 100K, Order No. 111329).
• Connect the battery
• Fill and bleed the coolant circuit according to the vehicle manufacturer's specifications.
• Program MultiControl CAR, teach Telestart transmitter
• The J255 A/C control unit has to be programmed to "parking heater without Can".
• Make settings on A/C control panel according to the "Operating Instructions for End Cus-
tomer".
• Place the "Switch off parking heater before refuelling" caution label in the area of the filler
neck.
• For initial start-up and function check, see installation instructions.
Ident. No.: 1318915G_EN Status: 27.11.2014 © Webasto Thermo & Comfort SE 40