Opera PRIMA Installation Instructions Manual page 23

Uncommanded
opening / closing of
the deadbolt while
supplying power to
the lock.
The deadbolt opens
and closes in quick
succession.
The deadbolt moves
with dif�culty when
opening and/or
closing.
In case of persistent problems and/or defective lock, contact the authorized
Tel: +39 059 451708
AVOID INTERVENTIONS THAT WILL VOID THE WARRANTY.
Do not �le / drill / tamper with the lock or any of its parts.
Timing
adjustment
Power supply
Mechanical
obstructions
Dirt
dealer or OPERA customer care.
e-mail: info@opera-access.it
Check that the opening/closing
timing hasn't been set to zero.
If so, reset the timing
(see Timing Adjustment).
Check that the lock is correctly
powered (Vmin = 11 Vdc between
the black wires, Imin = 3 A (peak),
Imaint. = 300 mA). Check whether
this remains constant while the
opening command is being sent.
Try replacing the power supply or
powering the lock with a 12 V
battery.
Check for the absence of
excessive friction and/or play.
Check the correct positioning
and/or alignment of the striking
plate (6 mm max).
Internal optical end stops obscured
by dirt or non functioning.
Contact OPERA customer care
23