ADJ PINPOINT GOBO COLOR User Manual page 12

G O B O I N S T A L L A T I O N
The PinPoint Gobo COLOR comes with 4 replaceable gobos (see below). To install a gobo, remove
the gobo holder by unscrewing the thumb screw located at the top of the fixture. Remove the retain-
er ring that holds the gobo in place, then remove the old gobo and replace it with the new gobo.
Re-install the retainer ring to hold the gobo in place, insert the holder back into the unit, and tighten
the thumb screw to secure the gobo holder.
F R O S T F I L T E R I N S T A L L A T I O N
The PinPoint Gobo COLOR comes with a frost filter. To install the filter, remove the gobo holder from
the fixture, then remove the retainer ring that holds the gobo in place. Install the filter and replace the
retainer ring.
12