Advertisement
display. Ensure Coaxial is selected as the TV's audio output, then adjust the volume of
the soundbar using the volume up and volume down buttons on the remote control or
soundbar control panel.
•
Bluetooth: Press the "BT" button on the remote control or repeatedly pressing the
Mode button on the soundbar control panel until BT is shown on the LED display. The
LED display will flash to indicate that the soundbar is in Bluetooth pairing mode.
Ensure that the device you wish to connect is also in pairing mode and search for
"Kogan 180W Dolby SB" in its device list. When the two devices are paired, the LED
display on the soundbar will remain solidly lit. The soundbar will now automatically re-
pair with this device whenever it is within range and has Bluetooth turned on.
Notes: Long-press the BT button on the remote control to disconnect
or reconnect the Bluetooth between the phone and the soundbar.
•
USB media mode: The soundbar is compatible with USB flash drives of up to 64GB
(Fat32 format) in size and can play MP3/WAV/FLAC audio files directly. Insert a
compatible drive (not supplied) into the USB port on the back of the soundbar and the
unit will automatically switch to USB mode and play the first compatible track.
Press the Repeat Playback button on the remote control to toggle between single track
repeat ("ONE"), or all track repeat ("ALL") to repeat all songs.
The media player also has a memory function that will recall and continue from the
last-played point when a USB flash drive that has previously been used with the
soundbar is reinserted.
•
Equalizer modes: The soundbar has three equalizer presets, tailored to complement
various styles of audio. Press the EQ button on the remote to cycle between Music
("EQ1"), Movie ("EQ2"), and News ("EQ3") presets.
•
Wall mounting: The soundbar has two keyhole slots on the back to enable wall
mounting using the wall-mounting kit provided.
Advertisement
