Transmit Power; Button Lock Function - Kenwood ProTalk TK-3710 User Manual

TRANSMIT POWER

Press the [ A ] button to change the transmit power of all transceiver channels to
low power (you cannot change low transmit power channels to high power). Press
the [ A ] button again to return all channels to their default transmit power setting.
• The " " indicator appears while using low transmit power.

BUTTON LOCK FUNCTION

Press and hold the [ C> ] button to lock the transceiver buttons and Selector.
• Beep A (1 beep) sounds when the Button Lock function is activated.
• "LOCKED" appears when a button is pressed while the Button Lock function is
active.
Press and hold the [ C> ] button again to turn the Button Lock function off.
Note:
◆ You can still use the following buttons when the Lock function is activated:
Side 1 (Squelch Off), Side 2 (Backlight), [ C> ] (Button Lock), and PTT switch.
12