Kenwood ProTalk TK-3710 User Manual page 36

Monitor Momentary
PF Button:
Press and hold the programmed button to momentarily turn the transceiver
signaling off. Releasing this button turns the transceiver signaling back on. While
signaling is off, you can listen to all calls that are received on the channel.
Operator Selectable Tone
Switches the preset CTCSS/DCS Decode/Encode pair to an OST (Operator
Selectable Tone) pair.
PF Button:
Press the programmed button to change the OST On or Off.
Menu Mode:
Select "OST" and press the [ S ] button to change the OST On or Off.
OST List
Allows you to enter OST List mode.
1 PF Button:
Press and hold the programmed button to enter OST List Mode.
Menu Mode:
Mode.
2 Press the [ <B ] and [ C> ] buttons to select the OST List.
3 Press the [ S ] button to confirm and exit mode.
Select "OST LIST" and press the [ S ] button to enter OST List
36