Kenwood ProTalk TK-3710 User Manual page 8

e [  ], [  ], and [  ] buttons
[  ] button (Scan Delete/Add)
Press this button to remove an undesired channel from the scanning sequence
{p. 16}.
[  ] button (Battery Status)
Press this button, the Battery Status function operates. {p. 13}.
[  ] button (Duplex)
Press this button to change between Simplex and Duplex operation {p.11}.
f PTT (Push to Talk) switch
Press and hold, then speak into the microphone to transmit.
g Side 1 button (Squelch Off)
Press this button to hear background noise.
Press the button again to return to normal operation {p. 11}.
h Side 2 button (Backlight)
Press this button to turn the transceiver display and front panel button
backlight on {p. 11}.
Note:
◆ The [ S ], [ A ], [ <B ], [ C> ], [  ], [  ], [  ], Side 1 and Side 2 button
functions are factory settings. Other functions are set by your dealer. Refer
to "ACCESSIBLE FUNCTIONS" {p. 17} for the available functions that your
dealer has programmed to the transceiver.
8