Before Switching On The Power Supply - Kenwood CR-ST100S Operating Instructions Manual

1. Before switching on the power supply

IMPORTANT SAFETY INSTRUCTIONS
Attention: Read this page carefully to ensure safe operation of the device.
Read instructions carefully!
– Follow all safety and operating instructions when using this product.
Keep the instructions in a safe place!
– You should keep the safety and operating instructions for future reference.
Follow the warning instructions!
– You should strictly follow all warnings provided on the product and listed in the operating instruc-
tions.
1.1 Clean only with a dry cloth!
– Unplug the mains adapter of this device from the mains socket before cleaning this product. Never
use liquid cleaning detergents or cleaning sprays. Use only a damp cloth for cleaning.
1.2 Accessories
– Use only the accessories specified by the manufacturer.
1.3 Do not use this device near water
– The device should never be exposed to water droplets or water splashes, such as those found near
a bathtub, wash basin, kitchen sink, washing machine, wet basement or swimming pool. Never place
containers filled with liquids, such as e.g. flower vases, on the device.
1.4 Ventilation
– Slots and openings in the housing are used to ventilate the device to ensure reliable operation of
the device and to protect the device from overheating and possible autoignition. Do not block the
ventilation holes. Install the device according to the manufacturer's instructions. Never block the ven-
tilation holes by placing the device on a bed, sofa, rug, or similar soft surfaces. This device should not
be installed in a bookshelf or built-in wardrobe unless adequate ventilation is ensured.
1.5 Power supply
– This device may only be connected to the mains voltage with the supplied mains adapter. Use the
plug-in power supply only for the Smart Radio CR-ST100S. In any case, make sure that the local
mains voltage matches the specifications on the mains adapter. If you are unsure about the type of
power supply in your home, contact your specialised dealer or power company.
1.6 Plug-in power supply
– Make sure that you can not trip over the cable or that it is disconnected in the immediate vicinity of
a power outlet, including auxiliary sockets. Also, at the exit from the mains adapter, the cable must
not be squeezed under any circumstances.
1.7 Thunderstorm
– The device should be disconnected from the mains during thunderstorms and if it is not used for a
long time.
1.8 Overload
– Never overload mains sockets, extension cords or multiple sockets, otherwise there is a risk of fire or
electric shock.
3