Save Log Data
This function saves the operation and communication logs of this transceiver.
•
This function is for field support use such for your dealer.
Scan
Allows you starting or stopping scan.
PF Button:
Press the programmed button to start scanning. To stop scanning, press this
button.
Menu Mode:
Select "SCAN" and press the [ S ] button to activate/ deactivate the Scan.
•
The "
" indicator appears on the display.
•
The "
" indicator blinks while paused.
Refer to "SCAN" {p. 44}.
Scan Delete/ Add
Allows you to include or omit each channel in the scan sequence.
1
Select your desired channel.
2
PF Button:
Press the programmed button to change the Scan Delete/Add
status of the channel.
Menu Mode:
deactivate the Scan of the channel.
•
When a channel is added to scan, Beep A (1 beep) sounds and the "
(right side) indicator appears on the display.
•
When a channel is deleted (not include in scan), Beep B (2 beeps) sounds
and the "
Select "SCN D/A" and press the [ S ] button to activate/
" (right side) indicator disappears on the display.
38
"